| STAINLESS STEEL CARTRIDGES |
| |
S.S. Pleated Cartridge |
| |
 |
| |
Features : |
| • |
High dirt holding capacity. |
| • |
High reliable standard specifications. |
| • |
Has low pressure drop due to high porosity. |
| • |
Has accurate filtration rating. |
| • |
Easily cleanable by conventional chemical cleaning and ultrasonic cleaning |
| • |
Filtration area of pleated stainless steel filter element is increased by pleating. |
|
| |
| PRODUCT SPECIFICATION: |
| Micron Rating |
: |
3, 5, 10, 15, 20, 25, 30,40, 60, 80, 100micron |
| Material of Construction |
: |
S.S. 304 |
| Length |
: |
10” , 20” , 30” 40” |
| Inner Diameter |
: |
28mm |
| Outer Diameter |
: |
60, 65, 70, 86mm |
| Configuration |
: |
DOE |
| Working Temperature |
: |
320ºC |
|
| |
APPLICATION: |
| • |
Used in fitration of chemical fibre, medicines, chemical reagents, oil products, water, gas |
|
| |
S.S. Sintered Cartridge |
| |
 |
Sintered powder filters are mainly for the filtration of air or liquid and flow control. The materials for sintered powder filter can be stainless steel, bronze, nickel, titanium, Monel, Hastelloy etc. Available filtration rating is 0.5 to 100µ.
| |
Features : |
| • |
High strength, no need of support. |
| • |
No possibility of media migration occuring. |
| • |
Wide operating temprature range. |
| • |
Strongly corrosion resistant. |
| • |
Very easy to clean. Long service life. |
| • |
Available filtration rating 0.5, 1, 3, 5, 10, 20, 40, 75, 100µ |
| • |
Any specific size can be fabricated as per customer request |
|
| |
| PRODUCT SPECIFICATION |
| Micron Rating |
: |
0.5, 1, 3, 5, 10, 20, 40, 75, 100µ |
| Material of Construction |
: |
S.S. 316L |
| Support, Core & End Cap |
: |
S.S. 304 / 316 / 316L |
| Length |
: |
10” , 20” , 30” 40” |
| Inner Diameter |
: |
28mm |
| Outer Diameter |
: |
63mm, 70mm, 80mm |
| Configuration |
: |
Double Open End (DOE) |
| |
|
1” BSP, 222, 226 |
|
| |
APPLICATION: |
| • |
Used in fitration of chemical fibre, medicines, chemical reagents, oil products, water, gas |
|
|
|
|
|
|
|
