MOF E Series is not a CARBON BLOCK
It’s a wet-molded product made
from activated carbon and synthetic fiber
FEATURES:
•
High chlorine reduction.
•
Low Pressure drop
•
High chemical adsorptive capacity.
•
Antibacterial filter with silver-impregnated
activated carbon (E2,E3)
•
5 µm filtration
•
Coconut shell activated carbon
•
No release of fine activated carbon
•
No binder is used for end cap and
packing.
•
Jumbo size carbon block in 250mm and 500mm
The MOF-E series is formed Acid washed coconut shell activated carbon and is molded together with
synthetic fiber binder via a wet production method. Adsorption
capacity is unaffected because the surface of activated carbon
is not hindered by a binder. So, can maintain high levels of
chlorine reduction and chemical adsorptive capacity.
Surface area for E3 : 1900m2/g iodine number:1600mg/g
MOF-E2 and E3 are designed with antibacterial function in mind.
PRODUCT
SPECIFICATION
Type
:
E1, E2 & E3
Micron Rating
:
5 micron
Material of Construction
:
Molded Activated Carbon
Length
:
250mm, 500mm
Inner Diameter
:
30mm
Outer Diameter
:
65mm, 110mm(Jumbo)
Configuration
:
Double Open End (DOE)
Maximum Operating Temperature
:
80ºC
MOF E series
E1
E2
E3
Filter Size
2.56” OD X 1.18” ID X 9.84”
65mmOD
X 30mmIDx250mmL
Gal
Gpm
L
L/min
Gal
Gpm
L
L/min
Gal
Gpm
L
L/min
Chlorine reduction > 90%
13,000
1.0
50,000
3.8
13,000
1.0
50,000
3.8
30,000
1.0
114,000
3.8
Choloform reduction >95%
1,000
0.5
3,800
1.9
1,000
0.5
3,800
1.9
750
0.5
2,850
1.9
Particle reduction >95%
5µm
5µm
5µm
Initial delta P
0.56
psid@ 1.0gpm/0.004 MPa@3.8L/min
Antibacteria
X
O
O
Activated Carbon Source
Coconuts
shell
Special application of water purifier and air cleaner activated carbon filter available in sheet and customised sizes.
